Subscription: Verify that the subscription listed is the correct one.The values shown in the example can be adjusted according to the settings that you require. You'll see a green check mark when the values you enter are validated. On the Basics tab, configure the VNet settings for Project details and Instance details.
This opens the Create virtual network page. On the Virtual network page, select Create. Select Virtual network from the Marketplace results to open the Virtual network page. In Search resources, service, and docs (G+/), type virtual network. Plan your network configuration accordingly. Additionally, if you want to connect this virtual network to another virtual network, the address space cannot overlap with the other virtual network. If a duplicate address range exists on both sides of the VPN connection, traffic will route in an unexpected way. When using a virtual network as part of a cross-premises architecture, be sure to coordinate with your on-premises network administrator to carve out an IP address range that you can use specifically for this virtual network. In this section, you'll create a virtual network (VNet) using the following values: None of the subnets of your on-premises network can over lap with the virtual network subnets that you want to connect to. When you create this configuration, you must specify the IP address range prefixes that Azure will route to your on-premises location. If you're unfamiliar with the IP address ranges located in your on-premises network configuration, you need to coordinate with someone who can provide those details for you.Verify that you have an externally facing public IPv4 address for your VPN device.For more information about compatible VPN devices and device configuration, see About VPN Devices. Make sure you have a compatible VPN device and someone who is able to configure it.If you don't have one, create one for free. An Azure account with an active subscription.
0 kommentar(er)
